The Abductor Flip Down Kit, model 31467, is seating hardware general designed to allow abductors and lateral pads to swing away during wheelchair transfers. Designed to be used with the manufacturer's Abductor Pads or Lateral Pads (see separate entries), this kit includes one four-inch coated steel tapered L-bracket, one 2.75-inch coated steel slotted L-bracket, one 2.75-inch coated steel extrender, one anodized aluminum hinge, and mounting hardware. COLOR: Black.
The Adjustable Brackets are wheelchair seating hardware used in many areas such as wheelchair seat construction and wheelchair seat positioning with seat hooks. Made of stainless steel, both ends are rounded. One end is punched with two 17/64 inch x 5/8 inch slots and the other with a selected number of ##10 through holes. They are deburred for a smooth finish. Brackets are available with one, three, five, seven, or nine holes. COLOR: Available in black and stainless steel.
The Adjustable J Hook Bracket Hardware Seating Package, package 20XX, is seating hardware designed for use on a wheelchair. The Package includes a solid back insert including T-nuts; a solid seat insert including T-nuts; a wide, 1.5-inch offset seat to back hinge; a pair of 1- inch diameter tube two-hole J hooks; a pair of five-hole adjustable L brackets; a pair of 1-inch diameter tube six-hole J hooks; a pair of two-hole adjustable L brackets; a 1-inch diameter tube drop stop; and a 1-inch diam
Adjustable-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four J-brackets, four L-brackets, and screws and locking nuts needed to adjust the brackets and to secure the brackets to the Drop Seat (see separate entry). The hardware in the Kits can be raised and lowered to adjust the Drop Seat. DIMENSIONS: Model 32517 fits chairs with 7/8-inch tubes and model 32518 fits chairs with one-inch tubes.
The Ball Ratchet Set is a seating hardware allowing angle adjustment in 5 degree increments. It is made of cast and heat treated alloy steel. It can be bolted or welded inside 7/8 inch diameter by 18 gauge round tubing. The Set is useful for legrests, seat to back attachments, and other seating applications. It is available in chromed or unchromed.
These Clamps are seating hardware designed to be used in wheelchair seating systems. The Positioning Clamp has applications where clamping of the mounting hardware is fastened to the tubing of the wheelchair. It is most often used on the rear of the wheel base to position the chair initially and to keep the chair from shifting. The Swivel Clamp is a riveted one-piece design, used for securing the seat to the wheel base or wheelchair. By turning the swivel hold-down 90 degrees, complete seating d
The Figure-8 Clamp is a seating hardware and a mounting clamp for accessories designed for use with wheelchairs. The two-part clamp is used to attach controls, accessories, and other devices to wheelchairs. One side of the clamp accommodates .75-inch tubing and the other side accommodates 7/8 inch tubing. Deep-set cap screws are used to tighten clamp around tubing. Set screws can provide additional mounting stability. COLOR: Model 32310B comes in black. WARRANTY: The manufacturer warrants this p
Fixed-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four drop hooks, eight washers, and eight socket head screws. DIMENSIONS: Models 32617 and 32603 create a one-inch drop. Models 32618H and 32604H create a two-inch drop. Models 32542H and 32543H create a three-inch drop. Models 32617H, 32618H, and 32542H fit chairs with 7/8-inch tubes. The other models fit chairs with one-inch tubes.
The Flip Down Kit With Abductor Pad is seating hardware general and an abductor pad designed to aid in positioning individuals who use wheelchairs. This kit includes an abductor pad, one four-inch coated steel tapered L-bracket, one 2.75-inch coated steel slotted L-bracket, one 2.75-inch coated steel extrender, one anodized aluminum hinge with push-button release, and mounting hardware. The Abductor Pad is made of textured urethane self-skinning foam and come with 10-32 T-nuts embedded in all m
Growth Links (Model GL01 thru GL06) and Dial Links (GL10) are hardware designed for attaching seats and backs. They are designed to be used with aluminum pans, but Wood Adaptors (Model GL21, $40/pair) are available for mounting to wooden panels. The links come in pairs and have adjustable angles. Growth links are to be used when back is supported by separate frame. Dial links support back independently.
The Headrest Hardware, series 100, is seating hardware designed for use on wheelchairs. Each hardware kit includes link hardware and offers a wide range of adjustment. This hardware offers five points of adjustability. COLOR: All hardware is black chromed and anodized.
The Interface Hardware, models 442F2 and 442F1, is seating hardware designed to allow mounting of Otto Bock seating systems into Maclaren or Pogon strollers or wheelchairs ranging from 10 to 18 inches wide. A spring-loaded plunger mechanism allows quick removal of the seat for transfer into another base or for transporting. Custom interfaces are available to accommodate mounting systems on most power bases and scooters.
The Lateral Extension Bracket is torso support hardware designed for individuals with neurological or severe physical disabilities or cerebral palsy. The bracket expands the range in which seating supports can be adjusted laterally. The unit is attached at the end of the adjustment slot of the existing trunk lateral brackets and provides almost 3 extra inches of width adjustment for growing children and other individuals who need extra expansion of their seating system. This bracket bolts to mo
The Miller's Complete Support Systems are lateral trunk support components designed to be mounted off the seat, back insert, modular pan, or wheelchair frame, depending on the application, to give support to the trunk and pelvic areas or to provide adduction. Components of the seat, back, or pan-mounted systems include fixed, swing-away, and multiplane inserts, pads, and doglegs. The doglegs allow approximately 2 additional inches of lateral adjustment. The Multi Plane provides greater flexibili
The Miller's Mounting Hardware Components are designed for affixing wheelchair accessories to solid seat and back panels or to 7/8 and 1 inch wheelchair frame tubing. Fixed, swingaway, and adjustable type clamps and brackets are available. COLOR: Silver or black chrome finish.
-- PROTOTYPE --------- PURPOSE: To create a prototype of a wheelchair seat that aids wheelchair users to change his or her seated position periodically. Changing position when seated for a long period of time is especially important for wheelchair users who spend almost every making moment seated. Failure to do so can result in deformities, bedsores, or considerable pain. The Swiss research group, Empa, is working with an ergonomics company to develop a new type of wheelchair seat that periodica
The Multi-Axis Offset Headrest Assembly, model 32465, is seating hardware designed to attach offset headrests to standard wheelcahair frames. The entire assembly is designed to be used with small, large, combination, small lateral support, and neck rest style headrests (headrests sold separately). The heavy-duty assembly features an offset block that swivels on a ball for headrest adjustment in any direction, a straight bar that adjusts horizontally, a heavy-duty mounting ring, a durable mounti
The Otto Bock Tall Back and Modular Back Headrest Mounting Kit ($5) and the Otto Bock Headrest Adapter Kit ($20) are headrest accessories that allow attachment of Otto Bock headrest mounting hardware directly to the Jay Back cushion, compensating for the contour of the cushion.
Positioning Hardware is seating hardware general designed for attaching positioning aids to wheelchairs. Available items include two-, four-, six-, and eight-hole adjustment hooks; drop hooks; drop hooks for thigh pad inner mount; drop hooks for thigh pad outer mount; side, bottom, and parallel flanges; latch tabs; universal rear bracket; and a swing tab U-bracket. Also available is a seatlock; a seatblock; a headrest mounting plate; a child's headrest support; an adult headrest support; and six
Complete line of seating hardware for mounting backs, seats, lateral trunk supports, abductors, headrests, leg and footrests in wheelchairs and other mobility bases. Adjustable and non-adjustable, knob-release and drop hook styles. May be ordered in complete kits or by individual components. Optional components $93.00 to $2.00.
The Adjustable Seat Hooks are designed to serve a variety of extended wheelchair seat positioning applications, such as angling or height adjustment. These stainless steel hooks are countersunk for a ##10 flathead screw. DIMENSIONS: The hooks are 0.75-inch wide and are available to fit tubes 0.75 inch, 7/8 inch, 1 inch, or 1 3/16 inch in diameter. COLOR: Available in black or stainless steel
The Seat Hook, Drop is one-piece seating hardware designed for lowering and leveling a wheelchair seat. It is made of stainless steel and fabricated with two 17/64 inch x 5/8 inch mating slots. Both ends are curved and deburred for a smooth finish. DIMENSIONS: The hook ends fit tubes 0.75 inch, 7/8 inch, 1 inch or 1 3/16 inches in diameter. The drop offsets range from 1 inch to 6 inches in 1-inch increments. COLOR: Available in black or stainless steel.
The Seat Hook, Lift is seating hardware designed to lift and level wheelchair seats. It is made of stainless steel and fabricated with two 17/64 inch x 5/8 inch mating slots. Both ends are rounded and deburred for a smooth finish. DIMENSIONS: The hook fits tubing 0.75 inch, 7/8 inch, 1 inch or 1 3/16 inches in diameter. The lift offset ranges from 0 inches, 0.5 inch, or 1 inch to 2 inches. COLOR: Available in black or stainless steel.
Seating Hardware is designed for use with wheelchairs. This hardware is made of steel and includes 90-degree brackets and J-hooks (sold separately). DIMENSIONS: All hardware has 0.5-inch spacing, COLOR: Black.
Seating Hardware are components for seating systems that include: 7 types of head and neck supports, 5 models of outer pommel supports, 2 inner pommel support, anterior stop bars, 10 footrest bracket options, 25 suspension hook options, slide brackets, strap hooks, tray brackets, 2 types of headrest hardware, single end button locks, removable lateral hardware, laterals, box seat hardware, solid seat and back brackets, solid seat and back hinges, kids seat bracket, and a drop away pommel.
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted seating support for a child with dystonic cerebral palsy. When sitting in a chair, the child pushes his pelvis forward and becomes uncomfortable, and the child concentrates more on sitting than on his books, crafts, and other activities. The family attempted to remedy the seating issue by adding a two-piece insert, the commercially available “tomato seat;" however, this device did not secure properly to the chair. The child
Spacer Kits are seating hardware designed to be used in wheelchair seating systems. Along with adjustable brackets, spacers are used to space out hooks. For example, a spacer is used when mounting a 14-inch seating system on a 15-inch wheelchair. Spacers are fabricated from a solid piece of aluminum with clearance holes for ##10-32 screws placed on 1/2 inch centers. A Spacer Kit contains one Spacer Block, two ##10-32 x 1 inch Flat Head Socket Drives with Grade 8 screws, and two ##10-32 Nylok Nu
The Adjustable Square Tubing Seat Hooks are designed to serve a variety of extended wheelchair seat positioning applications, such as angling or height adjustment in conjunction with an adjustable bracket. Made of stainless steel, they are countersunk for a ##10 flathead screw. DIMENSIONS: The hooks are 0.75-inch wide and are available to fit square tubes 0.75 inch, 7/8 inch, or 1 inch in diameter. COLOR: Available in black or stainless steel
The Square Tubing Seat Hook, Drop is designed to lower and level the seat in wheelchairs with three-quarter inch square tubing. It is made of stainless steel and fabricated with two 17/64 inch x 5/8 inch mating slots. Both ends are rounded and deburred for a smooth surface. DIMENSIONS: The drop offset ranges from 0 inches to 1.5 inches in half-inch increments. COLOR: The hooks are available in black and stainless steel.
The Square Tubing Seat Hook, Lift is designed for raised seat applications on wheelchairs with three-quarter inch square tubing. It is made of stainless steel and is fabricated with two 17/64 inch x 5/8 inch mating slots. The ends are both rounded and deburred for a smooth surface. DIMENSIONS: The lift offset is 1 inch. COLOR: Stainless steel or black.
The Universal Headrest Mounting Plate is seating hardware designed for use with wheelchair headrests. This plate enables a variety of headrests from various manufacturers to be interchanged as needed. The headrests may be changed without having to redo the T-nuts in the back.
Wheelchair Adaptive Hardware is seating hardware designed for attaching seating components to standard wheelcahir frames. Available hardware includes drop hooks, adjustable angle hooks, horseshoe clips, U-brackets, seat blocks and locks, strap hinges, adjustable headrest support brackets, and lateral trunk support brackets and pads. WARRANTY: The manufacturer warrants these products against defects in materials and workmanship for 90 days from the date of purchase.