The Ergo Mug is an easy to hold cup has an extra wide handle and grooved gripping surface. A small finger rest opposite the handle allows it to be lifted with both hands reducing the risk of spills. Graduation markings and translucent plastic make it easy to see how much fluid is consumed.
The Anti-Spill Drinking Cup, model F74547, consists of a drinking cup and holder that attaches to any flat surface with Velcro strips. The 8-ounce plastic cup features an open handle and a snap-in top with 1-inch wide hole for sipping. This top piece is reversible for use by left-handed individuals. The cup fits into the supporting well which has a disc of Velcro fastener hook material attached to the bottom. Two 1.5-inch strips of Velcro fastener loop material are supplied for attachment to any
The Arthro Thumbs-Up Replacement Lid is functional and lightweight for people who have decreased grip strength, wrist pain, hand deformities, or need to keep the wrist in a neutral position. The ergonomic design increases leverage of the hand and aids in raising the cup to the lips without wrist motion. The thumbs-on grip reduces the possibility of spilling due to trembling. The cup is double-walled to protect hands from heat or cold.
The Beaker with Holder & Lid is a cup with holder and spout designed for use by individuals with spinal cord injury, severe physical disabilities, or upper extremity disabilities. The cup is made of polycarbonate and has a polypropene holder with a large D-shaped handle. The polypropene lid is equipped with a spout. The cup is heat insulated and is suitable for hot or cold liquids.
The Bedside Beverage Holder is a cup, can, or bottle hoder designed to clamp onto bed rails. This unit features a flexible holder arm and an adjustable clamp. DIMENSIONS: The arm is 11 inches long and the clamp adjusts to fit rails from 0.75 to 1 inch in diameter.
The Chairmate Cup/Ashtray Holder, model F70622-0000, is a wheelchair drink holder designed for use by individuals who use wheelchairs. The unit features a double-well cup holder and a removable ashtray. The deeper well has a pop-out bottom that accommodates most glasses and cups. The unit can be attached vertically or horizontally on the right or left side of any chair, metal frame-bed, or tubular frame wheelchair bar from 1/2 to 1.25 inches in diameter. DIMENSIONS (LxWxD): 7.75 x 6.25 x 1.75 in
The Clamp-On Cup Holder, model 16C035, is a wheelchair drink holder designed for use by individuals who use wheelchairs. This device attaches to most wheelchairs. Once the attachment clip (included) is installed onto the chair, the cup holder itself can be removed as needed. There are no tools required. DIMENSIONS: Attachment clips fit 7/8 and 1 inch tubes.
The Clip-on Glass Holder, model F74576, is a drink holder designed to be attached to a wheelchair frame, commode, or other tubular frame haveing a diameter of 0.75 to 1 inch. This helical spring-wound wire holder has a baked-on enamel finish and a plated clip. DIMENSIONS: 2 7/8 inch inside diameter x 3 inches high.
The Cup Holder is a wheelchair cup, glass, mug, or can holder designed to allow individuals who do not have the use of their hands to drink through a straw from his/her own cup without assistance. The plastic adjustable cup cradle is fixed to the top of a 10 mm stainless steel rod. The rod is mounted onto the wheelchair arm with a plastic connector. The cradle has two openings on either side for a mug handle and will accommodate a wide variety of drinking containers, allowing the user to use a p
DO IT YOURSELF PURPOSE: To provide powered wheelchair users with the ability to carry beverages. A cup holder designed to clamp to an automotive air vent can be adapted for use on a wheelchair. Zip ties can be used to secure the holder squarely to the frame where it works best for the user. TITLE: Cup Holder. REF: http://www.wheelchairmodifications.org. The organization can also be reached at Wheelchair Modifications, 5533 A Pony Farm Drive, Richmond, VA 23227.
This cup holder is made of molded plastic and has a mounting lug for attachment to a wheelchair. Left or right attachment, for desk or full length arms. Easily removable.
Cup Holder, model HA-4263, is a cup or glass holder designed for use by individuals with grasping or upper extremity disabilities or arthritis. This cup holder has two large handles to assist with control, enabling the user to hold the cup in the correct position for drinking. WEIGHT: 55 grams.
DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with quadriplegia to drink independently. This cup holder is made using a flexible gooseneck microphone stand with fittings at each end, a machined clamp that fits the wheelchair armrest, a piece of black PVC drain collar, and fence wire. The PVC collar has a notch cut into the side of it to hold a thermal coffee cup, and a wire cage
was added below to hold most juice bottles and soda cans. A piece of fencing wire is placed inside the go
DO IT YOURSELF ENTRY --- PURPOSE: To create an easy way to pick up various size cups or bottles. Cut a piece of 4-inch diameter PVC pipe and split it on one side so the hoop can expand and fit over a larger container. Screw a wooden handle into the PVC pipe directly opposite the split. MATERIALS: Wooden handle; 4-inch diameter PVC pipe; wood screws. TOOLS: Bandsaw, screwdriver. SKILLS REQUIRED: Carpentry. TITLE: Doing It Yourself. AUTHOR: Wechsler, K. JOURNAL: Quest. WEB SITE: http://www.mdausa.
The Cups with Sleeve, model H74600, are non-breakable frosted plastic cups with a sleeve attached to it for inserting either pre-formed or flexible handles to assist individuals with limited manual dexterity or strength to drink independently. The handles can be shaped to fit individual needs such as two handles, one handle in the shape of a palmar cuff, etc. All components of the cup are dishwasher safe.
The Dietsco Universal Cup Holder is a wheelchair drink holder designed for use by individuals with mobility disabilities or spinal cord injury. This holder attaches to the wheelchair or scooter armrest with the included mounting hardware.
CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with severe phyical disabilities to carry beverages. A chrome-plated curtain rod was used to make a vertical tube system that fits into brackets installed on a wheelchair. A horizontal crossbar supports a plastic container which, in turn, holds a cup or glass that the user can access with a straw. TITLE: Easels, Calling Systems and More. JOURNAL: TAD Journal. REF: Volume 24, Number 4, Summer 2004: P. 16-17. PAGES: 3 (including cove
The Drink Holder is a wheelchair drink holder designed for use by individuals with lower extremity, mobility or walking disabilities or spinal cord injury. The unit consists of a stainless steel frame with a clamping system for attaching to a chair, crutches or walker. The clamp has a rubber grommet to prevent scratching, along with an adjustable Velcro tightening strap. The holder can be carried in the user's wheelchair bag until it is needed. An insulated beverage jacket is included. It can al
The Dycem Non-Slip Cup Holder is a cup holder designed for use by individuals with upper extremity and severe physical disabilities. Made of Dycem non-slip material, this shallow holder fits snugly on the bottom of most standard mugs and glasses. Once on the cup, the holder prevents unwanted movement and spillage. The holder can be removed for washing in warm, soapy water. DIMENSIONS: 3.5 x 0.75 inches. COLOR: Blue.
The Enlarging Handle for person with Spasiticity is an enlarged handle designed for a person with grasping disabilities to hold a cup. It is made from a detergent bottle handle attached to a plastic cup-like container that the drinking cup fits inside. Follow the following steps to create this adaptation.
The Enlarging Handle is a cup holder specifically designed for people with spasticity or grasping difficulties. Cut the handle off of a detergent bottle. Then take a cup-like plastic container, such as a bottle used for contact lens solution, and cut a notch into it. Push the detergent bottle handle into the notch of the cup-like container and secure it with duct tape. Then place a drinking cup inside the larger container. The user will be able to hold the Enlarging Handle and sip out of the dri
The Freedom Large Cup Holder is a cup holder designed for use by individuals with upper extremity, neurological, or mobility disabilities. This collapsible, weighted drinkholder has an integral base with a cork bottom to absorb moisture. A patented locking leg prevents the drink holder from collapsing while in use. The cup holder adjusts to hold 16- to 46-ounce glasses, mugs, cans or bottles. This cupholder is designed not to move or tip over when hit or bumped, making it useful for wheelchair t
The Freedom Standard Cup Holder is a cup holder designed for use by individuals with upper extremity, neurological, or mobility disabilities. This collapsible, weighted drinkholder has an integral base with a cork bottom to absorb moisture. A patented locking leg prevents the drink holder from collapsing while in use. The cup holder adjusts to hold 6- to 16-ounce glasses, mugs, cans, or bottles. This cupholder is designed not to move or tip over when hit or bumped, making it useful for wheelchai
The Freedom Wheelchair Cup Holder is a wheelchair drink holder designed for use by individuals who use wheelchairs. Available for square or round tubing, this holder can also be used on scooters, walkers, rollators, and bed rails. The attached clamping mechanism tightens securely on any upright or horizontal tubing. To use, open the holder and adjust the holder's arms to hold 16- to 46-ounce cups, mugs, glasses or bottles with up to a four-inch diameter base. The holder closes flat when not in u
Handi-Holder is a wheelchair drink holder designed for use by individuals with mobility disabilities. The unit attaches to tubular areas of wheelchairs, walkers, and scooters to carry drinks and other items. The unit is removable without tools or fasteners from its mounting to allow accessibility for transfers. This rugged drink holder mounts securely at convenient locations on swing away footrests and other tubular areas. OPTIONS: Additional mounts and custom modifications. DIMENSIONS: Models a
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Holders for mugs and glasses that a person with weak or stiff hands can lift either resting on the palm or between thumb and index finger on the side of the hand. Provides pattern and instructions for constructing two holders, one for tall glasses, the other for shorter wider containers such as mugs. They are both made with a wood base or platform and wood upright, to which is fastened a piece cut from a plastic drainpipe; this part wraps around the gl
The Hydrant Replacement Tube and Mouthpiece is designed for people with upper extremity disabilities. The water bottle is designed to handle and keep liquids within easy reach and can be attached to wheelchair and hospital beds. It includes a 44-inch long drinking tube with a mouthpiece and a clip for attaching the tube to clothing.
The Hydrant Sports is a drinking bottle is designed for people with upper extremity disabilities. It enables those with poor grips to easily hold and drink beverages with no assistance needed. The ergonomic indentations allow for a comfortable grip.
The Inglis Drink-Aide is a cup with holder designed for use by individuals who use wheelchairs or who have limited upper body movement. Designed to enable independent hands-free drinking, this unit consists of a 28-ounce insulated water bottle; a long flexible, vibration-resistant drinking tube; and a universal clamp. The clamp enables the unit to be attached to a bed, a wheelchair, etc. OPTIONS: Extra drinking tubes.
The Large Cupholder with Square Wheelchair Attachment is a wheelchair cup holder with attachment designed for use by individuals with lower extremity and mobility disabilities, spinal cord injury and others who use wheelchairs. Designed for square tube wheelchair frames, this device attaches to either side of the chair and secures to wheelchair metal frame. To open the attachment door, the user folds the door down to form the base of the cup holder, and adjusts the arms to accommodate 16-ounce t
The Lotion Applicator is designed for users with limited upper extremity strength and/or range of motion. The device is intended to assist with rubbing or spreading medications, lotions, suntan oils, and sports creams on out-of-the-way areas with ease. The 12-inch built-up ribbed handle has a thumb rest and is angled in two spots for maximum motion. The sponge can be removed when worn and replaced with a new one.
The Modular Cup System is a cup with a holder and a large handle designed for use by children and adults with grasping disabilities. The components of this system snap together in a variety of ways to meet the specific needs of the user. This clear cup holds hot or cold liquids and comes with a holder, a T handle, and a U-shaped handle. OPTIONS: A lid set with a flat lid and a long-spouted lid and a set of three, two-ounce weights to stabilize the cup for users with tremors are available separat
Mother's 3rd Arm is a flexible, portable cup or baby bottle holder designed for use by children and adults with upper extremity disabilities. This device consists of a large cylinder affixed to a long flexible neck with a large clamp at the base. The adjustable clamp permits the device to be secured to the edges of tables or desks, the back of automobile seats, bed rails, or to the tubular frame of a stroller, wheelchair, or high chair. The cup or baby bottle is placed in the cylinder and the ne
The Muggi is a cup holder designed for use by individuals with upper extremity and severe physical disabilities. The device is designed to be a handy carrier for hot and cold drinks. The user can carry up to four mugs in the holder, or maybe two mugs and some cake or biscuits. The Muggi is lightweight but tough. It has rubber non-slip feet and is dishwasher and microwave safe.
The Quick Caddy Beverage Holder is a wheelchair drink holder or cup holder designed for use by individuals who use wheelchairs or walkers. This device consists of a strong stainless steel cage which mounts on any vertical or semi-vertical tube, rail, or pole using the attached flexible plastic mount with a hook-and-loop strap. The product comes with a foam "cozy" which securely holds soda cans or small water bottles. Without the cozy, the cage can carry larger 16-ounce glasses or larger water bo
The Quick Cage Water Bottle Holder is a wheelchair drink holder or cup holder designed for use by individuals who use wheelchairs, walkers or crutches. This stainless steel water bottle cage mounts to any vertical or horizontal tube, rail, or pole using an attached flexible plastic mount and a hook-and-loop strap. The unit includes a 21-ounce water bottle with the Twofish unlimited insignia.
The RoboCup is a cup, can or drink holder designed for use by people who use a walker, wheelchair or mobility scooter and other individuals with a disability that affects their ability to hold or grasp objects. This portable dual caddy can securely hold two drinks, two fishing poles, tools, gear and personal belongings such as a telephone, keys, glasses and flashlight. The unit attaches to wheelchairs, walkers, scooters, grab bars, hospital beds or golf carts using the integrated clamp. The Robo
The Sammons Preston Cup and Holder for Wheelchair, model 1139, is a wheelchair drink holder with cup designed for use by individuals who use wheelchairs. This device attaches to most wheelchairs, canes, and walkers. The unit features a cup with large open loop handle, snap on lid with opening, and two plastic coated spring clips for mounting. Once the attachment clip is installed onto the chair, the cup holder itself can be removed as needed. The cup holds up to 8 ounces of liquid and is dishw
---- PROTOTYPE --------- PURPOSE: Sluice prototype allows individuals suffering from arthritis or having limited upper body strength to easily dispense beverages without supporting the full weight of the liquids in their containers. Designed to accommodate a variety of standard containers from cartons to 2 liters to gallons jugs, Sluice was developed through extensive prototyping and user testing.
The Spill-Not Cup Stabilizer, model F74544-0001, is a drinking cup with a holder/base designed to keep drinks in an upright position and to avoid spills. The unit will hold an 8-ounce paper or foam cup or a drinking glass. The hexagonal base features a well to position the cup. It is molded of polypropylene and is autoclavable at 250 degrees Fahrenheit. DIMENSIONS: 3.25 inches across the flats of the hexagon; the well is 2 1/8 inches in diameter. COLOR: Bright yellow to provide increased visibil
The SpillNot is a cup holder designed for use by individuals with upper extremity and severe physical disabilities. The device can be used for carrying mugs, glasses and small bowls. The non-slip coaster (included) can be removed and used to protect furniture; it also works as a jar opener. The SpillNot is made of a curved plastic body with a non-slip platform for cups or glasses, and a fabric handle.
The Stickey Cup Holder is a cup holder designed for use by individuals with fine motor or grasping disabilities. Designed to eliminate spills, this device features a suction cup bottom that holds tight to any flat, non-porous surface, and is easily removed when desired. The device secures cans, bottles, cups, tumblers, and containers of various sizes. OPTIONS: The cup holder is available for wholesale purchase with custom colors and logos. DIMENSIONS (HxW): 4 x 4.25 inches. WEIGHT: 5 ounces. CO
The Support de verre (Glass holder) is designed for users with upper extremity, neurological, or mobility disabilities. The glass holder is intended to assist the user hold or lift the device. This makes it possible for the users to stabilize the glass with minimum strength.
TheraSIP Swallowing Trainer is designed to provide a systematic swallowing exercise program which can be used in treatment and prescribed for in-room or in the home drills. It strives to increase the patients volitional swallow frequency and strength as well as to encourage a heightened, purposeful effort. Practice of single bolus swallows or continuous swallows can be provided. As a neuromuscular exercise program focuses on the specificity of the exercise and on the use of repetition to maximiz
Thirst Free is a wheelchair drink holder designed to provide hands-free carrying of beverages for individuals with mobility disabilities. The adjustable, plastic device features a wide body with a plastic ring to hold the cup. Molded clamps at the top and bottom of the device secure it to the side rails of wheechairs, bed rails, and the front horizontal bars of walkers.
The uDrink is a can, cup, or bottle holder designed for use by individuals with severe physical, neurological, upper extremity, or grasping disabilities or spinal cord injury. This device consists of a container holder with super grip non-slip strap liner and a stainless steel handle with a rubberized coating. The strap liner allows the strap to securely hold irregularly shaped items and containers, as well as containers covered in condensation. The handle is equipped with a slot through which t
This Universal Adaptive Drink Holder is designed for individuals who have limited or no grip, persons with disabilities that negatively affect their fine motor skills, a person with a traumatic brain injury, spinal cord injury, MS, cerebral palsy, someone who has arthritis or had a stroke. With the Universal Adaptive Drink Holder the user can drink independently. This product has a curved handle and can be adjusted to fit onto bottles, cans, cups & glasses of all different shapes, sizes and
Clip on drink holder. Vinyl coated metal clips attach to wheelchair desk arms. Holder is lightweight plastic with adjustable Velcro closure to accommodate various sized containers.
The Wheelchair Cup Holder is a wheelchair drink holder designed for use by individuals who use wheelchairs. This holder can be attached vertically or horizontally on the right or left side. Side opening enable the unit to accommodate mugs with handles.
The Wheelchair Cup Holder, model F70622-0001, is a wheelchair drink holder designed for use by individuals who use wheelchairs. This unit also clamps to walkers, rollators, bed rails, and other tubular frames and is equipped with a large lever knob to secure the clamp. The attached plastic holder holds glasses, cans, bottles and it is slotted on two sides to accommodate cups with handles. The holder is is accessible for use by right- or left-handed users. DIMENSIONS: The holder is 3.5 inches hig
Wonder-Flo Vacuum Cup is made of durable molded polypropylene, consisting of a tumbler, a tight fitting top with spout and a rubber button used for controlled feeding, if needed. It is designed for people suffering from Dysphasia and to those individuals who are unable of drawing the liquid out by themselves. It is microwaveable and contains latex.